Fail-safe, Fail-secure Adjustable Electric Drop Bolt Lock

Model Number: BL-N2000 Brand Name: N2000 Key Specifications/Special Features: Fail-safe, fail-secure adjustable electric drop bolt lockBL-N2000 electric bolt lock is controlled with an intelligent circuit, and its working voltage is DC12V.A locking delay circuit is set at the side of the lock for choice among 0/3/6/9 seconds by the userLocking delay can be selected to prevent from bolt's being sprung out when the door is not closed stably, a door detection circuit is designed in the bolt lock, which is led out of the lock through a wire for the user to detect and monitor on/off status of the doorII. Instruction for use and installation:1. Prior to use, please read the instruction carefully, check if major parts are complete, and prior to installation, try to simulate connection as per electric wiring diagram following working way of the electric bolt lock and perform actual installation after the lock works normally2. The electric bolt lock consists of two major components (1) magnet seat and (2) main body of electric bolt lock, at installation, interval between the magnet seat and positive side of the bolt lock shall not be more than 3mm, point the bolt hole on magnet seat right at the bolt on the lock and place the magnet in the center of the lock as shown inFigure 1.

3. LED wires of six colors stick out of the tail part of the lock: red, black, brown, grey, green and orange, as shown in Figure 1. Red wire is for positive pole of power supply of the bolt, which is connected to power of DC12V (+) or positive power line of a controlled power black wire is for negative pole