UL certificated aluminum composite panel

Model Number: Aluwedo-H-048 Brand Name: ALUWEDO Key Specifications/Special Features: Panel Specifications and Dimension:Thickness:2mm (0.08”), 3mm (0.12”)4mm ( 0.16”)5mm ( 0.2”) 6mm( 0.24”) ,Thickness recommended: 4mm( 0.16”)Width: 850mm to 2000mm, ( 34” to 80” )Recommended: 1220mm(48.8”), 1250mm(50”), 1500mm(60”), 2000mm(80”)Panel lengthas requiredAluminum thickness: 0.3mm (0.012”) to 0.5mm(0.02”)*Custom width and length available upon request subject to minimum quantitiesRecommendedDimension:
1220mm (4ft)*2440mm(8ft)*3mm ( 0.12”)*0.21mm (0.08”)
1500mm (5ft)*3050mm(10ft)*3mm ( 0.12”)*0.21mm (0.08”)

Fabrication：
Sawing:- With vertical panel saw, circular, compass or first saw.
Drilling holes for joining:- With drill bits for aluminum sheet and plastic panels (for larger holes use a drill bit with locating point).
Routing:- With conventional routing equipment, to avoid pressure marks, please use plastic or wood vice jaws when chucking the work places.
Shearing:- With a guillotine (check correct insertion of top cover sheet). Blanking tools to be padded.
Bending:- With folding table min. Inside bending radius r= 15*t (t=panel thickness) spring-beck effect higher than with solid sheet.
Screwing:- With conventional stainless wooden, sheet metal and metal screws. For outdoor use, please take panel expansion into account!
Folding (routing technique):- Manually after routing a V-groove on reverse side using a panel saw with milling attachment or a hand milling cutter
Edges:- Using a file with a rasp-like cut to file roughly cut contours lengthwise.
Punching:- With a steel band tool on punching base for panels of 2 and 3 mm in thickness
Pressing:- With a brake press min. inside radius r = 15*t (t=panel thickness) spring-back effect higher than with solid sheet.
Riveting:- With the usual equipment, using rivets or blind rivets. For outside use, please pay attention to thepanel expansion