PCB Board Laser Marking Machine, 20W Laser Printing for Electronic Parts ABS PCB

Model Number: LB-MFP20-#8318 Brand Name: Leadboom Key Specifications/Special Features: PCB board laser marking machine 20W laser printing for electronic parts ABS PCBWhat is laser marking?"Laser marking" stands for marking or labeling of workpieces and materials with a laser beamIn this regard, different processes are distinguished, such as engraving, removing, staining, annealing and foamingDepending on the material and the quality requirement, each of these procedures has its own advantages and disadvantagesWhat materials can be marked with a laser?

• Metals:Stainless steel, aluminum, gold, silver, titanium, bronze, platinum or copper
• Plastics:ABS, polycarbonate, polyamide, PMMA or plastics with laser additives
• Paints
• Foils and films and packing
• Laminates

Depending on the material,different laser typesare used for laser marking


Benefits of fiber laser marking

• High-precision marking at constant quality

Thanks to the high precision of laser marking, even very delicate graphics, 1-point fonts and very small geometries will turn out clearly legible At the same time, marking with the laser ensures constant high-quality results

• Durable marking

Laser etching is permanent and at the same time resistant to abrasion, heat and acids Depending on the laser parameter settings, certain materials can also be marked without damaging the surface

• High marking speed

Laser marking is one of the fastest marking processes available in the market This results in high productivity and cost benefits during manufacture Depending on the material structure and size, different laser sources or laser machines can be used to further increase the speed

• Leadboomlaser machines for laser marking

Leadboom LASER offers you a wide range of flatbed and galvo laser machines for marking a large variety of materials



Laser marking machine technical parameters

Type: LB-MF10LB-MF20LB-MF30
Power:10/20/30W
Beam quality: M2≤14M2≤18M2≤18
Marking speed: ≤7000, /s≤8000, /s≤8000mm/s
Power consumption: 05/08/12kW
Fiber laser: AO Q-switch pulse fiber laser
Wavelength: 1064nm
Laser marking software: EzCad21
Working area: 50x50-300x300mm
Minimum line width: 001mm
Repeated precision: ±0001mm
Min characters: 015mm
Cooling system: air-cooling
Location system: red dot indicator
Power supply: 220V AC /50Hz
Control system Ezcad motion control card-PC
Dynamic focusing device: yes
Dimension: 800 x 680 x 1200mm